Technical Information

	Carbon Monoxide Detector	Control Panel
Power	230v AC	230vAC 500mA
Power Consumption	<3W	<2W
Environment	Temp – 0-55°C Humidity - <95%	Temp – 0-55°C Humidity - <95%
Response Time	<30 seconds	<5 seconds
Alarm	Visual & Audible (90 db)	Visual only
Weight	270 g	128 g
Size	126 x 78 x 37 mm	110 x 84 x 40 mm
Frequency	433 MHz	433 MHz
Range	200 meters in Open Ground
Approvals	Carbon Monoxide Detector EN50291 Combustible Gases Detector EN50194

The Flowtechsystem is designed to provide Visual and Audible Alarms in line with EN50291and EN50194 levels and close the gas supply to prevent further build up. Inboth cases the gas supply will be closed within 45 seconds of the alarm levelbeing reached.

	Gas Meter Control Lever Shut Off
Environment	Temp : -10-50°C Humidity - <95%
Torque	30-60 kg cm
Reset	Reset button on Control Panel or Manual on device
Closing Time	5-10 seconds
Rated Voltage	12vDC
Operating Voltage	6v-18v DC
Rated Power	1.2W

Gas Meter Control Lever Shut Off

Gas Meter Control Lever Shut Off issupplied with 2 sizes of Mounting bracket to match with the Gas Meter Controlvalve size and receives 12v DC supply from the Control Panel link only whenrequired to close the gas supply.

The Gas Meter Control Lever ShutOff device is easily mounted onto the Lever control and requires nointerruption of the gas supply line and no engineer to install it.

Pulse Valve
Quiescent Working Current	0A
Rated voltage for valve close	DC9~12V
Resistance of loop in valve-closed	4.5Ω±0.5Ω
Diameter	G1/2 and G3/4
Response Time from pulse to closed	<0.3 sec
Operating Temperature	-15°C - 50°C

The Flowtech System can also control a 12v DC Pulse Valve fitted into the gas line which is sent a power pulse on a 30 second cycle in the event of an alarm.