Magne-Flo Safety Valves
 Introducing Magne-Flo's automatic cut-off and reset valve for natural gas, in the event of a break in the supply.
The Magne-Flo valves are made up of five parts;-- A ferrite magnet, housed in a brass fitting.
- The only moving part - a stainless steel operating plate.
- Magnet retainer, plastic body.
- Plastic seat body.
- Housed in either a 28mm or 22mm brass fitting, manufactured to strict quality control guidelines.
 
All valves are fitted with the Magne-Flo patented unique automatic shut off and reset mechanisms.
Fitting
The 28mm and 22mm valve should be fitted on the downstream/domestic side of the
meter. Fitting is simple. Must be filled by a registered GasSafe engineer.
The valves can be fitted in any position and are not affected by orientation. They require no maintenance and are tamper proof.
Risk Areas Identified
Human error, theft of appliances, particularly boilers, unreliable tenants and owners, 'cowboy fitters', in fact every property with gas should have Magne-Flo automatic gas valves fitted. The valves are a 'fuse' for gas safety
An important by-product of this valve is realised in the event of the most common of fires in the home - kitchen fires. If the fire takes hold, it will melt the solder that joins the copper gas pipes. Should this happen and the pipes separate, the Magne-Flo valve will cut off the gas at the meter, limiting the damage. This will protect fire crews called to the scene.
Specifications
22mm compression fitting.
BG Certificate number BG/EC-87/97/150.
28mm compression fitting.
Advantica Certificate number TC/05/009
Product Type : Excess Flow Control
Gas Families : 1st, 2nd, 3rd
Designation Countries: All European Union countries.
EC Product Ident. No: C87AS150
American Gas Association Laboratories certificate number L2388001
AGA Report number P-125-1A
Product Profile - Operation and Certification
The Magne-Flo excess flow valve which is designed to close above a specific flow rate. After repair and the gas is turned on, the valve will automatically reset itself via the by-pass.
For natural gas - valves MF1001 - less than 10 SCFH.
For LPG gas - valves MF502 - less than 2 SCFH.
The valves are configured for the following flow rates:
Natural Gas - 21 mb
LPG - 28 & 37mb
Quality and Certification
Every EFV is flow tested after assembly to rigid operational tolerances. Sample quantities are also performance tested as part of a strict quality assurance programme. The 22mm Magne-Flo valves are fully certified for use in the UK and EC, Certificate number BG/EC87/97/150. 28mm valve, Certificate number TC/05/009
Distribution
Available from major plumbers merchants and stockists. For your nearest supplier, contact us
|
 | |  |
 |
Non-one would want electricity without a fuse system, so why put lives and property at risk of explosion when this inexpensive Magne-flo gas safety valve is available?
It could save your life
The Advantages Long
life span
Low
cost
Multi-application
compatibility
Accurate
Flow Control
Safer
working conditions
Self
contained sealed units
Easy
installation
No
maintenance Performance
at low pressures
Instant
valve closure
Protection
against fire
Consistent
performance
BG/Advantica
approved certification
Automatic
reset
Tamper
proof
Meter
and appliance protection
Circuit breaker for gas
| |
 |
 | |  |
|
